 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number:ENN2605B Monolithic Linear IC L79M00T Series -5 to -12V 0.5A 3-Pin Voltage Regulators Features * Output voltage L79M05T : -5V L79M06T : -6V L79M08T : -8V L79M09T : -9V L79M10T : -10V L79M12T : -12V * 500mA output. * Small-sized power package TP-3H permitting the equipment to be made compact. * The allowable power dissipation can be increased by being surface-mounted on the board. * Capable of being mounted in a variety of methods because of various lead forming versions available. * On-chip protectors (overcurrent limiter, ASO protector, thermal protector). * Can meet tape-used automatic mounting requirements. Package Dimensions unit:mm 3110 [L79M00T Series] 1.5 6.5 5.0 2.3 0.5 5.5 7.0 0.6 0.5 7.5 1.2 0.5 2.6 2.6 1 2 3 1 : COMMON 2 : INPUT 3 : OUTPUT SANYO : TP-3H Equivalent Circuit Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D1599TH (KT)/D218YT/9237KI/7247TA, TS No.2605-1/5 L79M00T Series Specifications [Common to L79M00T series] Maximum Ratings at Ta = 25C Parameter Maximum Supply Voltage Allowable Power Dissipation Operating Temperature Storage Temperature Symbol VCC max Pd max Topr Tstg -5 to -12V output Conditions Ratings -35 1.0 -30 to +80 -40 to +150 Unit V W C C [L79M05T] Recommended Operating Conditions at Ta = 25C Parameter Input Voltage Output Current Symbol VIN IOUT Conditions Ratings -20 to -7.5 5 to 500 Unit V mA Operating Characteristics at Ta = 25C, VIN=-10V, IOUT=350mA, CIN=2F, COUT=1F Parameter Output Voltage Line Regulation Load Regulation Output Voltage Current Dissipation Current Dissipation Variation (Line) Current Dissipation Variation (Load) Output Noise Voltage Ripple Rejection Minimum Input-Output Voltage Drop Short Current Peak Output Current Symbol VOUT Vo LINE Vo LOAD VOUT ICC LINE ICC LOAD Conditions Tj=25C Tj=25C, -25VVIN-7V Tj=25C, -18VVIN-8V Tj=25C, 5mAIOUT500mA Tj=25C, 5mAIOUT350mA Ratings min -5.2 typ -5.0 7.0 3.0 10 5 -5.25 1.0 -4.75 2.5 1.0 0.4 125 50 50 65 1.1 130 800 max -4.8 50 30 100 Unit V mV mV mV mV V mA mA mA V dB dB V mA mA -25VVIN-7V, 5mAIOUT350mA Tj=25C ICC -25VVIN-8V 5mAIOUT350mA 10Hzf100kHz f=120Hz, -18VVIN-8V, Tj=25C, IOUT=100mA f=120Hz, -18VVIN-8V, Tj=25C, IOUT=300mA Tj=25C, IOUT=350mA Tj=25C, VIN=-30V VNO Rrej VDROP IOS IOP [L79M06T] Recommended Operating Conditions at Ta = 25C Parameter Input Voltage Output Current Symbol VIN IOUT Conditions Ratings -21 to -8.5 5 to 500 Unit V mA Operating Characteristics at Ta = 25C, VIN=-11V, IOUT=350mA, CIN=2F, COUT=1F Parameter Output Voltage Line Regulation Load Regulation Output Voltage Current Dissipation Current Dissipation Variation (Line) Current Dissipation Variation (Load) Output Noise Voltage Ripple Rejection Minimum Input-Output Voltage Drop Short Current Peak Output Current Symbol VOUT Vo LINE Vo LOAD VOUT ICC LINE ICC LOAD Conditions Ratings min -6.25 typ -6.0 7.0 3.0 10 5 -6.3 1.0 -5.7 2.5 1.0 0.4 150 50 50 65 1.1 130 800 max -5.75 60 40 120 Unit V mV mV mV mV V mA mA mA V dB dB V mA mA Tj=25C Tj=25C, -25VVIN-8V Tj=25C, -19VVIN-9V Tj=25C, 5mAIOUT500mA Tj=25C, 5mAIOUT350mA -25VVIN-8V, 5mAIOUT350mA ICC Tj=25C -25VVIN-9V 5mAIOUT350mA 10Hzf100kHz VNO Rrej VDROP IOS IOP f=120Hz, -19VVIN-9V, Tj=25C, IOUT=100mA f=120Hz, -19VVIN-9V, Tj=25C, IOUT=300mA Tj=25C, IOUT=350mA Tj=25C, VIN=-30V No.2605-2/5 L79M00T Series [L79M08T] Recommended Operating Conditions at Ta = 25C Parameter Input Voltage Output Current Symbol VIN IOUT Conditions Ratings -23 to -11 5 to 500 Unit V mA Operating Characteristics at Ta = 25C, VIN=-14V, IOUT=350mA, CIN=2F, COUT=1F Parameter Output Voltage Line Regulation Load Regulation Output Voltage Current Dissipation Current Dissipation Variation (Line) Current Dissipation Variation (Load) Output Noise Voltage Ripple Rejection Minimum Input-Output Voltage Drop Short Current Peak Output Current Symbol VOUT Vo LINE Vo LOAD VOUT ICC LINE ICC LOAD Conditions Tj=25C Tj=25C, -25VVIN-10.5V Tj=25C, -21VVIN-11V Tj=25C, 5mAIOUT500mA Tj=25C, 5mAIOUT350mA -25VVIN-10.5V, 5mAIOUT350mA Tj=25C -25VVIN-10.5V 5mAIOUT350mA 10Hzf100kHz f=120Hz, -21.5VVIN-11.5V, Tj=25C, IOUT=100mA f=120Hz, -21.5VVIN-11.5V, Tj=25C, IOUT=300mA Tj=25C, IOUT=350mA Tj=25C, VIN=-30V Ratings min -8.3 typ -8.0 8.0 4.0 11 6 -8.4 1.0 -7.6 2.5 1.0 0.4 200 50 50 64 1.1 130 800 max -7.7 80 50 160 Unit V mV mV mV mV V mA mA mA V dB dB V mA mA ICC VNO Rrej VDROP IOS IOP [L79M09T] Recommended Operating Conditions at Ta = 25C Parameter Input Voltage Output Current Symbol VIN IOUT Conditions Ratings -25 to -12 5 to 500 Unit V mA Operating Characteristics at Ta = 25C, VIN=-16V, IOUT=350mA, CIN=2F, COUT=1F Parameter Output Voltage Line Regulation Load Regulation Output Voltage Current Dissipation Current Dissipation Variation (Line) Current Dissipation Variation (Load) Output Noise Voltage Ripple Rejection Minimum Input-Output Voltage Drop Short Current Peak Output Current Symbol VOUT Vo LINE Vo LOAD VOUT ICC LINE ICC LOAD Conditions Tj=25C Tj=25C, -25VVIN-11.5V Tj=25C, -20VVIN-12V Tj=25C, 5mAIOUT500mA Tj=25C, 5mAIOUT350mA -25VVIN-11.5V, 5mAIOUT350mA Tj=25C -25VVIN-11.5V 5mAIOUT350mA 10Hzf100kHz f=120Hz, -22.5VVIN-12.5V, Tj=25C, IOUT=100mA f=120Hz,-22.5VVIN-12.5V, Tj=25C, IOUT=300mA Tj=25C, IOUT=350mA Tj=25C, VIN=-30V Ratings min -9.4 typ -9.0 8.0 4.0 12 7 -9.5 1.0 -8.5 2.5 1.0 0.4 225 50 50 63 1.1 130 800 max -8.6 80 50 200 Unit V mV mV mV mV V mA mA mA V dB dB V mA mA ICC VNO Rrej VDROP IOS IOP No.2605-3/5 L79M00T Series [L79M10T] Recommended Operating Conditions at Ta = 25C Parameter Input Voltage Output Current Symbol VIN IOUT Conditions Ratings -25 to -13 5 to 500 Unit V mA Operating Characteristics at Ta = 25C, VIN=-17V, IOUT=350mA, CIN=2F, COUT=1F Parameter Output Voltage Line Regulation Load Regulation Output Voltage Current Dissipation Current Dissipation Variation (Line) Current Dissipation Variation (Load) Output Noise Voltage Ripple Rejection Minimum Input-Output Voltage Drop Short Current Peak Output Current Symbol VOUT Vo LINE Vo LOAD VOUT ICC LINE ICC LOAD Conditions Tj=25C Tj=25C, -25VVIN-12.5V Tj=25C, -22VVIN-13V Tj=25C, 5mAIOUT500mA Tj=25C, 5mAIOUT350mA -25VVIN-12.5V, 5mAIOUT350mA Tj=25C -25VVIN-12.5V 5mAIOUT350mA 10Hzf100kHz f=120Hz, -23.5VVIN-13.5V, Tj=25C, IOUT=100mA f=120Hz, -23.5VVIN-13.5V, Tj=25C, IOUT=300mA Tj=25C, IOUT=350mA Tj=25C, VIN=-30V Ratings min -10.4 typ -10 9.0 5.0 12 7 -10.5 1.0 -9.5 2.5 1.0 0.4 250 50 50 63 1.1 130 800 max -9.6 80 50 200 Unit V mV mV mV mV V mA mA mA V dB dB V mA mA ICC VNO Rrej VDROP IOS IOP [L79M12T] Recommended Operating Conditions at Ta = 25C Parameter Input Voltage Output Current Symbol VIN IOUT Conditions Ratings -25 to -15 5 to 500 Unit V mA Operating Characteristics at Ta = 25C, VIN=-19V, IOUT=350mA, CIN=2F, COUT=1F Parameter Output Voltage Line Regulation Load Regulation Output Voltage Current Dissipation Current Dissipation Variation (Line) Current Dissipation Variation (Load) Output Noise Voltage Ripple Rejection Minimum Input-Output Voltage Drop Short Current Peak Output Current Symbol VOUT Vo LINE Vo LOAD VOUT ICC LINE ICC LOAD Conditions Ratings min -12.5 typ -12 9.0 5.0 9 6 -12.6 1.6 -11.4 3.5 1.0 0.4 300 50 50 72 1.1 130 800 max -11.5 80 50 240 Unit V mV mV mV mV V mA mA mA V dB dB V mA mA Tj=25C Tj=25C, -30VVIN-14.5V Tj=25C, -25VVIN-15V Tj=25C, 5mAIOUT500mA Tj=25C, 5mAIOUT350mA -30VVIN-14.5V, 5mAIOUT350mA ICC Tj=25C -30VVIN-14.5V 5mAIOUT350mA 10Hzf100kHz VNO Rrej VDROP IOS IOP f=120Hz, -25VVIN-15V, Tj=25C, IOUT=100mA f=120Hz, -25VVIN-15V, Tj=25C, IOUT=300mA Tj=25C, IOUT=350mA Tj=25C, VIN=-30V No.2605-4/5 L79M00T Series Specified Test Circuit (Common to L79M00T series) Note) VIN max must be in the range specified above, with regulation, etc. considered. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 1999. Specifications and information herein are subject to change without notice. PS No.2605-5/5 |
Price & Availability of L79M00TSERIES
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |